Challenger Life Forums banner
1 - 5 of 5 Posts

·
Premium Member
Joined
·
65 Posts
Discussion Starter · #1 ·
If you drive a late-model rear-wheel-drive Chrysler or Dodge car—a 2010 Dodge Challenger, for instance—you'll want to take note of this one.
Chrysler has issued a recall of select 2009 and 2010 model-year rear-wheel-drive vehicles for a problem that might lead to the front wheels falling off. Apparently, some of these models left the Brampton, Ontario factory without a front spindle nut—a part that, to put it bluntly, keeps other parts in the front-wheel area from coming undone.
"While driving, a tire and wheel separation could occur increasing the risk of a crash," says National Highway Traffic Safety Administration's Office of Defects Investigation (ODI) report. Prior to any issue, vehicles missing the part likely wouldn't drive any differently without the part.

2010 Dodge Challenger SRT8
Enlarge Photo

The recall covers 12,674 vehicles that potentially have the issue, including 2009 and 2010 Dodge Challenger, Dodge Charger, and Chrysler 300 models.
Dealers will inspect the area and make sure the vehicles have a spindle nut.
Chrysler started the recall last week, and owners of the affected vehicles should contact the dealership or call Chrysler at 800-835-1403 for more information.
The Dodge Challenger SRT8 is fitted with 20in forged aluminum wheels from AlcoaEnlarge Photo If you drive a late-model rear-wheel-drive Chrysler or Dodge car—a 2010 Dodge Challenger, for instance—you'll want to take note of this one. Chrysler has issued a recall of select 2009 and 2010 model-year rear-wheel-drive vehicles for a problem that might lead to the front wheels falling off. Apparently, some of these models left the Brampton, Ontario factory without a front spindle nut—a part that, to put it bluntly, keeps other parts in the front-wheel area from coming undone. "While driving, a tire and wheel separation could occur increasing the risk of a crash," says National Highway Traffic Safety Administration's Office of Defects Investigation (ODI) report. Prior to any issue, vehicles missing the part likely wouldn't drive any differently without the part. 2010 Dodge Challenger SRT8Enlarge Photo The recall covers 12,674 vehicles that potentially have the issue, including 2009 and 2010 Dodge Challenger, Dodge Charger, and Chrysler 300 models. Dealers will inspect the area and make sure the vehicles have a spindle nut. Chrysler started the recall last week, and owners of the affected vehicles should contact the dealership or call Chrysler at 800-835-1403 for more information.
 

·
Registered
Joined
·
110 Posts
i've driven mine almost 12k miles, wouldn't i have noticed a missing spindle nut by now? they are talking about the main big nut in the middle of the rotor, right?
 

·
Super Moderator
Joined
·
5,454 Posts
I dont think so, because I beleive we have hub bearings on ours, but a spindle nut on a ball joint sure would be noticeable.
 

·
Premium Member
Joined
·
3,505 Posts
i've driven mine almost 12k miles, wouldn't i have noticed a missing spindle nut by now? they are talking about the main big nut in the middle of the rotor, right?
You would have received a recall notice if your car was one of them.

And that's the way I read it. The nut on the end of the spindle.
 

·
Registered
Joined
·
110 Posts
oh ok, then i won't worry.
I haven't even had the wheels off mine yet to see what the whole spindle arrangement looks like.
 
1 - 5 of 5 Posts
Top