CRUSH engine compartment mods

2258 Views 15 Replies 6 Participants Last post by Paladin06, Dec 16, 2009

Paladin06

Discussion Starter · Sep 20, 2009

CNC 85mm TB, CF engine covers with custom lettering decals, BT thermostat neck, TECHNO Strut Brace, BT Custom Fuse box cover, BT engine dress upo kit, MOPAR CAI w/custom decal, BT strut hardware covers. There's more. Can you post it?

See less See more

Save

1 - 16 of 16 Posts

IntimidatorR/T

· #2 · Sep 20, 2009

Fantastic looking engine bay. nice clean and love the fuse box cover, hemi valve covers carbon fiber.

Save

Latenite1

· #3 · Sep 21, 2009

Nice and clean and opp? Whaz zat? Something there
on the passenger fender well...?

Never mind, it was just my reflection

Save

agentorange

· #4 · Sep 25, 2009

What do you all use to keep the engine bay as clean as it looks. Is this a garage Queen? You don't drive it, right?
Mine is a daily driver, garaged every day when I get home. I only live 1 1/2 mile from work and still can't keep the dust from accumulating in the engine bay, car door hinges, front grill and bumper, and various other locations. However, I have only washed it with water twice since I've had it (1st of March). I have gone through two bottles of Meguiar's "Ultimate quik Detailer" though.
agentorange

Save

Paladin06

Discussion Starter · #5 · Sep 25, 2009

I wash my car and all the areas you mentioned and more everytime I wash my car. I wash my car everytime I drive it.

Save

· #6 · Sep 26, 2009

agentorange said:
What do you all use to keep the engine bay as clean as it looks. Is this a garage Queen? You don't drive it, right?
Mine is a daily driver, garaged every day when I get home. I only live 1 1/2 mile from work and still can't keep the dust from accumulating in the engine bay, car door hinges, front grill and bumper, and various other locations. However, I have only washed it with water twice since I've had it (1st of March). I have gone through two bottles of Meguiar's "Ultimate quik Detailer" though.
agentorange

I'm a daily driver and garaged as well. I usually microfiber off the dust, quick wax for stubborn. I typically wash once every two weeks, wax when i'm annoyed how its not shining better than showroom, tends to be once a month or two at this point.

My engine bay is not that as clean as that, but also harder to see on Black. I use the meguirs quick wax inside the engine bay on painted parts

Save

IntimidatorR/T

· #7 · Sep 26, 2009

kbeast said:
I'm a daily driver and garaged as well. I usually microfiber off the dust, quick wax for stubborn. I typically wash once every two weeks, wax when i'm annoyed how its not shining better than showroom, tends to be once a month or two at this point.

My engine bay is not that as clean as that, but also harder to see on Black. I use the meguirs quick wax inside the engine bay on painted parts

mine is not garaged but I just about do the same as above. I also use the CD2 engine detailer in engine bay. As well as using the quick detailer too.

Save

agentorange

· #8 · Oct 22, 2009

CD2...What's that?
agentorange

Save

IntimidatorR/T

· #9 · Oct 22, 2009

engine detailer spray, you can get it at Autozone.

Save

GHOSTDANCE

· #10 · Dec 14, 2009

Looks Great -

- you might want to add a plate between fusebox and radiator like this guy did - Sweeeeeeeet

go to this http://www.killerglass.com/store/in...mage_large_additional=images/hemi2_02_LRG.jpg

Save

Paladin06

Discussion Starter · #11 · Dec 15, 2009

Thanks and I did that plate over a month ago. Never saw that pic before.

GHOSTDANCE said:
Looks Great - - you might want to add a plate between fusebox and radiator like this guy did - Sweeeeeeeet

go to this http://www.killerglass.com/store/in...mage_large_additional=images/hemi2_02_LRG.jpg

Save

GHOSTDANCE

· #12 · Dec 15, 2009 (Edited)

that design you did on the engine compartment is just SWEET :thumbupright: I am designing a plate to fill gap on mine as well - can you post a pic of yours! You did such a beautiful job (Best I have seen) on your center area, I would like to see what you came up with

ps - did you have the fuse box top custom made?? would you give details such as cost etc??

Save

Paladin06

Discussion Starter · #13 · Dec 15, 2009

Here's an updated pic of my engine compartment. The fuse box cover was custom made, my design by Billet Technology. They did all my engine and interior pieces.

GHOSTDANCE said:
that design you did on the engine compartment is just SWEET :thumbupright: I am designing a plate to fill gap on mine as well - can you post a pic of yours! You did such a beautiful job (Best I have seen) on your center area, I would like to see what you came up with

ps - did you have the fuse box top custom made?? would you give details such as cost etc??

See less See more

Save

GHOSTDANCE

· #14 · Dec 15, 2009

PRETTY and CLEAN!!! :clap:

Save

DC R/T

· #15 · Dec 16, 2009

That sticker behind the hood latch sure has the correct rating on it. Bad Ass. :rockout:

Save

Paladin06

Discussion Starter · #16 · Dec 16, 2009

Thanks all.

Save

1 - 16 of 16 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month