Challenger Life Forums banner

Rim Help

1142 Views 7 Replies 4 Participants Last post by  JaxHemi
So I plan on using 17" Torque Thrust Ms with some sticky DRs for the track
The set suggested to me is linked here, but they said I would need 1/8" spacers.

The bolt circle is 5x4.5inches which equals to a 5x114.3mm and our Challengers are 5x115mm. So the question is, how do the spacers make the rims fit with no problems?
1 - 1 of 8 Posts
maybe a clearance issue with the calipers Chris, only thing I can think of. BTW, nice rim choice for sure. :thumbupleft: :thumbupleft: :thumbupleft:
1 - 1 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.